MMA vs Epoxy Flooring for Commercial and Industrial Facilities
- Monotek, established 1977
- Installed Australia-wide
- AS 4586 slip-rated
- Full System Warranty
Looking at epoxy flooring for your facility?
Epoxy is often the default choice for commercial and industrial flooring. It’s widely used and works well in some environments.
But in facilities where downtime, safety, and long-term performance matter, epoxy can create problems over time.
That’s where MMA flooring is typically considered as an alternative.
MMA flooring vs epoxy flooring
| Factor | MMA Flooring | Epoxy Flooring |
|---|---|---|
|
Cure time |
Ready in hours |
Typically 24–72 hours |
|
Downtime |
Minimal disruption |
Extended shutdowns |
|
Installation conditions |
Can be installed in low temperatures |
Sensitive to temperature and moisture |
|
Slip resistance |
Designed for wet, high-risk environments |
Can become slippery over time |
|
Repairs |
Fast and localised |
Often requires larger shutdowns |
|
Lifespan |
Longer in demanding environments |
Shorter under heavy use |
What this means for your operation
Choosing between MMA and epoxy is not just a technical decision. It affects how your site runs.
With MMA flooring:
- your facility can return to service faster
- shutdowns are easier to plan and shorter to execute
- slip risks are easier to control in working conditions
- cleaning and compliance are more consistent
- maintenance becomes less disruptive over time
For sites that run continuously or operate under pressure, these differences add up quickly.
Where epoxy flooring can still work
Epoxy is still suitable for:
- low-traffic areas
- spaces where downtime is not critical
- environments with minimal exposure to moisture or chemicals
For higher-demand environments, those limitations tend to show up over time.
Where MMA flooring is commonly chosen
MMA flooring is used in commercial and industrial environments where performance needs to hold up:
commercial kitchens and food production
factories and manufacturing
warehouses and logistics
cold rooms and freezers
aquatic and wet areas
1977
Installing since 1977
100%
in-house crews
AU
Australia-wide
Trusted industrial and commercial flooring across Australia
Not sure if MMA or epoxy is right for your site?
Tell us about your commercial or industrial flooring project